PROMINENCE 8, 16, 24 & 32 Solar Combiner Box with Monitoring
Also Available in 8, 12, 16 and 24 String with Integrated 1000V DC Disconnect Switch!
AMtec Solar's solar system monitoring boxes are fully compatible with Fat Spaniel, Energy Recommerce,
ARGUS ON, DECK Monitoring and Draker Labs monitoring software.
(MODBUS communication)
PROMINENCE 8M
- 8 String Support
- Touch-Safe Fuse Holders
- Rated for up to 160A
- 25 lbs (GW) 21.5" X 17.75" X 8.5"
- Positive and Negative Outputs:
1X 350MCM-6 AWG
Prominence 8M
Solar Combiner Box with Monitoring Capability
Note: Available with 1000V DC Disconnect
(shown with optional wireless Modhopper)
PROMINENCE 16M
- 16 String Support
- Touch-Safe Fuse Holders
- Rated for up to 320A
- 44 lbs. (GW) 25.5" X 25.5" X 10"
- Positive and Negative Outputs: 2X 350MCM-6AWG
Prominence 16M
Note: Available with 1000V DC Disconnect
Solar Combiner Box with Monitoring Capability
(shown with optional wireless Modhopper)
Prominence 24M & 32M
- 24 or 32 String Support (24 string available with 1000V DC Disconnect)
- Touch-Safe Fuse Holders
- NEMA 4 Steel enclosure (36" x 30" x 10")
- Dual 2AWG-600MCM outputs on both positive and Negative Bars
- Ground outputs: 2 @ 6AWG-350MCM, 13 at 4-14AWG
- Total Continuous Current Rating: 640A, or 20A per string
- Listed to UL 1741
1741 (ETL) Listed
|
- Listed to UL1741
- NEMA 4X Fiberglass enclosure standard;
- Stainless Steel and Metallic options available.
- Custom backpan with integrated wire management and silkscreening of all components
- Copper Positive busbar eliminates messy wiring to fuse blocks
- Complete Monitoring capabilities of up to 20A per string
- Mod-Bus Communication
- Plug in play with wireless communication options available
Download Monitoring Solar Combiner Box Brochure
Smart Solar Combiner Box with Disconnect Brochure
 | |  |
 |
About Modbus
Modbus is a serial communications protocol published by Modicon® for use with its programmable logic controllers (PLCs). It is the de facto standard communications protocol in industry, and is now the most commonly available means of connecting industrial electronic devices.
Modbus allows for communication between many devices connected to the same network such as a system that measures temperature and humidity then communicates the results to a computer.
Modbus is often used to connect a supervisory computer with a remote terminal unit (RTU) in supervisory control and data acquisition (SCADA) systems.
Versions of the Modbus protocol exist for serial port and for Ethernet.
Modbus RTU (Serial Port): is a compact, binary representation of the data.
Modbus ASCII (Serial Port): is human readable, and more verbose.
Modbus TCP (Ethernet): for connections over TCP/IP, the more recent variant Modbus/TCP exists.
| |
 |
 | |  |
| Download Monitoring Solar Combiner Box Brochure
Founded in 2001, and based in Portland, Oregon, Obvius is a recognized leader of cost-effective hardware solutions for gathering energy information. Realizing our customers’ time is extremely valuable, Obvius continues to provide products with "plug & play" connectivity to simplify set-up and installation.
The company’s AcquiSuite™ and AcquiLite™ data acquisition servers offer a scalable solution for any energy monitoring application, including the ability to access and configure devices through ANY web browser. All Obvius products are manufactured in the USA maintaining a high standard of quality and reliability.
Obvius Configuration Console (PDF)
Obvius Console Software (Windows)
Obvious Default MODBUS Address
OBVIUS Current Monitor with MODBUS Output
Monitoring Installation Schematic
Prominence Series with Monitoring Installation and Operation Manual
|
